SETECNA EPC S.r.l. Partita IVA 04676070230
+39 045 860 0409
info@setecna.it

EXAMPLES

Example of Regulation: Radiant System for Heating and Cooling of 6 Zones with Dehumidifier and Heat Pump

In this example, the REG System manages a radiant heating and cooling system with one dehumidifier and a heat pump, in detail the Reg manages the following components:

  • 6 zones (kitchen, living room, bedroom 1 and 2, bathroom with tub and shower);
  • a dehumidifier;
  • a mixed circuit for the heating and cooling radiant floor system;
  • a direct circuit for the dehumidifier in summer and for a vertical designer radiator in winter;
  • a buffer tank;
  • an external temperature probe
  • a heat pump (set point via 0 / 10V, ON / OFF and heat/cool switch via dry contact, alarm signal input).

In addition, the REG-DOT-B display touch screen temperature and humidity sensor is used for the living room, which allows you to manage the system remotely via Wi-Fi.

Click on the following links to view the electrical and hydraulic diagrams!

EXAMPLE_1_HYDRAULIC-SCHEME_EN.pdf

EXAMPLE_1_ELECTRICAL-SCHEME_EN.pdf

Example of Regulation: Home Heating and Cooling Power Plant with Boiler and Heat Pumps

In this example, the REG System manages a home heating and cooling power plant consisting of two heat pumps and a boiler, in detail the Reg manages the following components:

  • two heat pumps via Modbus (with dedicated firmware) both for heating and cooling and one for domestic hot water production;
  • a boiler via OpenTherm to support heating in winter and to support DHW production
  • a buffer tank;
  • an external temperature probe;
  • a DHW storage tank and its recirculation pump;
  • two mixed and one direct circuits.

The GSM module is used to control the system remotely.

Click on the following links to view the electrical and hydraulic diagrams!

EXAMPLE_2_HYDRAULIC-SCHEME_EN.pdf

EXAMPLE_2_ELECTRICAL-SCHEME_EN.pdf

See also: